Detects when the battery voltage drops below a threshold and remains low for 120 seconds. At that time a relay is operated which may be connected to the low voltage indicator and alarm.
This Load Manager monitors D.C. voltage and operates a relay when the voltage drops below its set point. Special high Hysteresis feature maintains the relay in the energized condition
The Engine Idler is an input module of a high idle system, which works with the voltage monitor, and permits an operator to turn the high idle system On or Off
The Model 091-98-12 is designed to turn a load ON and OFF by grounding an input to the relay
The Model 091-155, Safety Lock 3, is a controller which permits unattended engine operation with the ignition key removed, but prevents unauthorized use of the vehicle. For vehicles that require 3 independent relays for the vehicle ignition.
The Air Eject automatically disconnects air lines from emergency vehicles. Ideally suited for vehicles that require a higher PSI to the vehicles air tank.
The Over Voltage Relay is a battery voltage monitor which detects an over voltage condition.
The Auto Current detects current and closes a switch when the sensed current flows to provide a remote indication.
The 091-56-IND Indicator is a remotely mounted bar graph battery condition display for the Auto Charge 1000, Auto Charge 1200 & Auto Charge 35/10. Normally supplied with each charger.
Solenoid air valve which controls the air pressure supplied to the actuator.
Interface relay, connects the Engine Idler to the ECM.
This Load Manager sequentially switches 8 self contained relays at 1/2 second intervals.
Copyright © 2000 - 2017 IndiaBizClub. All rights reserved
Make in India