Electronics and telecommunication Products in Shenzhen - Cleaning (188 results)

     
  • Electronics-and-telecommunicationx
  •  
  • Shenzhenx
  •  
  • Cleaningx
Max Pulsed Q Switched 100w Fiber Laser Metal Cleaning MFP 100

Max Pulsed Q Switched 100w Fiber Laser Metal Cleaning MFP 100

Shenzhen Max Pulsed Q switched 100w Fiber Laser Metal Cleaning MFP 100 performance. If you are looking for max pulsed q-switched 100w fiber laser metal cleaning (mfp-100), we must be your best choice as we now have -speed cleaning of the pollutants on the surface of the material without damaging the matrix material.It is suitable for the precision machining with narrow pulse width and high peak power can easily cope with the cleaning requirements of the surface of various shapes and sizes.Principle and Application of Laser CleaningLaser cleaning is based on the photophysical reaction between the laser beam and the pollution layer. The principle , the shock wave, the shock wave So that contaminants become debris and be removed.Laser cleaning can not only be used to clean organic pollutants, can also be used to clean inorganic, including metal corrosion, metal particles, dust, can be used for mold cleaning, cleaning equipment, electronic industry , precision machinery cleaning, cultural relics Cleaning and so on.The main factors affecting laser cleaning are laser power, pulse frequency, laser factors influencing laser power density are studied. In order to achieve the optimal cleaning effect, the higher frequency power parameters are preferred. The cleaning area is 40mm × 40mm rectangular area, galvanometer fixed, scanning speed of 6000mm / s..       Conclusion:A) the laser power is invariable, with the pulse frequency increases, the cleaning area damage reduced;B) the laser frequency is constant, with the laser power increases , the cleaning area damage increased;C) Experiments show that, under the above parameters, can completely remove carbon steel surface rust;D) Compared with the first cleaning, the damage of the matrix showed a tendency to increase, and the power was not obvious at 50%.E) From the above experiment, 50 %, the best cleaning effect, and the second cleaning and a cleaning difference is not large, taking into account the follow-up manual movement speed, choose...

Copyright © 2000 - 2017 IndiaBizClub. All rights reserved