Endless heat transfer printing felt

Sell Lead

Printing and Publishing


Endless heat transfer printing felt
Thermal transfer printing felt belt also called seamless felt belt,no joints endless felt belt. It is made of special high quality raw material:100% Nomex,the heat resistant could be 260c degree. That kind of felt belt suitable for transfer printing machine,such as Italy Farah,Rafah,Mantian,Santex,Japan East Valley,Texas691.692,Haining Shrink Machine,Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.
The heat-transfer machine blankets’ temperature resistance is 280?,it is made of imported raw material,blanket with smooth surface, no wandering, not springing, no burr, long service life and shrinkage rate will be controlled within 2%, this kind of endless felt belt is very suitable for all kinds of brand machine.
Technology:Needled punched
Material Feature:Heat Resistant
Continual temperature:220?
Peaking temperature:280?

1. 100% nomex raw material
2. The max temperature resistant 280?
3. Endless type - no joint(Don't worry about the fracture)
4. Misaligned----Our base cloth is use endless industrial  silk. Testing report showed the misaligned rate is about ±3mm.  enclosed our base cloth for your consideration
5. Shrinkage----The base cloth can control the shrinkage rate in 2.5%--3%.

1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180? And 220-280?.
2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.
3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.

Direction of our felt belt
1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter
to see if the perimeter is the same.
2. Adjust the machine pressure within 2kg. heat up to 150 ?, idle for 2 hours; heat up to
170?, idle for 2 hours; heat up to 190?, idle 3 hours( important); heat up to 200?,
idle for 2 hours.
3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg
according to your needed and start to printing."
Compamy Information as below:
Company Name: Huatao Group Ltd
Office Address: No 298 Zhonghua North Street, Xinhua District,050065 Shijiazhuang City, Hebei Province, China
www.industrial-felts.com ( Aluminium Exstruction and printing felt,nomex felt)
www.aerogel-blanket.com ( Aerogel Blanket,Pyrogel,Cryogel,Spaceloft )
Contact : Annie Lu
Tel: +86 0311 80690567
Fax?+86 0311 68008382
Mobile: +86 18032422676 ( whatsapp/Wechat/Imo/Viber)
Email : annie.lu@huataogroup.com

Report Error
More leads from this companyMore »
Offered by
Annie Lu

Shijiazhuang (China)

Printing and Publishing

Manufacturers, Trader, Service Provider & Exporter/Importer



About Company

HUATAO GROUP was found in 2008 by the owner Floyd, As the Group company,The boss collect all factories in together and establish HUATAO GROUP. HUATAO as the manufacturer and trader agent of a wide range of products and provide the professional servies all over the world which relate to All kinds of Aerogel Blanket,can be used into Oil Exploration, Oil Refining System ,City Heat Net Project ,Hot Pipe Cover ect. Our Main products including: 1) Pyrogel Aerogel Blanket 2) Cryogel Aerogel Blanket Our team of senior engineers can organize the best commodity source for you. By supplying the best Chinese products, Professional design and responsible attitude on service,we devote to creating our unique brand “HUATAO” in global. Since the establishment, ” HUATAO ” products have been supplied to more than 20 countries and set up the agencies. And our products and service have been recognized and trusted by the end users all the way. We believe, once we have the cooperation, “HUATAO” will be your most reliable partners in your road to success. Because of trust , business will be simple.. view more »

Copyright © 2000 - 2017 IndiaBizClub. All rights reserved