Electrical and power Products from Singapore (248 results)
We are an office supplies & stationeries specialist Pantry Goodies in items like Flash light.
DC DC Converters Non Isolated Point Of Load POL OKR T 6 W12 C
The OKR-T/6 series are miniature SIP non-isolated Point-of-Load (PoL) DC/DC power converters measuring only 0.41 x 0.65 x 0.30 inches (10.4 x 16.5 x 7.62 mm). The wide input range is 4.5 to 14 Volts DC. Based on 600 KHz synchronous buck topology, the high power conversion effi cient Point of Load (PoL) module features programmable output voltage and On/Off control, under voltage lock out (UVLO), overcurrent and over temperature protections. These units meet all standard UL/EN/ IEC 60950-1 safety
Low Power ICs
Murata offers a variety of short-range radio technology options in subsystem chip-level ICs. They provide the largest link budget and come in the smallest form factors in the industry. Unique Murata innovations include system-level functions that off-load functionality from the micro-controller to reduce power and computation burdens, and integrated design that delivers exceptionally long battery life whether in operation, idle, or sleep mode. These low-power ICs support all license-free ISM f
Power Devices Wireless Power Transmission Modules
These modules allow for wireless charging - charging of equipment with no cable connection, by simply placing it on a charging pad.
Power DC DC Converters Non Isolated Point Of Load POL
Ideal for powering the latest generation of FPGAs and DSPs, Murata’s non-isolated (PoL) DC-DC converters are DOSA compliant and are competitive alternatives to discrete designs. For driving various loads, our designs feature wide input voltage and output voltage capability, accurate output voltage, and additional functionality. Various form factors are available: DOSA standard designs, low profile package; SMD and pin insert designs are also available.
AC DC Power Enclosed Front End 3 Phase AC In D2U5T H3 7000
The D2U5T-H3-7000-54-HU4C is a High Effi ciency 3500/7000 watt, power factor corrected, three phase power converter for 230/480VAC lines with a 54VDC main output and a 5V or 3.3V (20W) selectable standby output. The unit is provided with droop sharing and up to three supplies may be operated in parallel. The supply is hot pluggable. It recovers from over temperature faults, and has status LEDs on the front panel in addition to logic and PMBus status signals. The 2U package and 23.1W/cubic inch p
AC DC Power Open Frame 1U
Murata’s open frame power supply design is an AC-DC switching converter module with a global standard 2 x 4 or 3 x 5 inch footprint, with a 1U height. Designed with advanced, in house components and unique circuit technologies, our 1U open frame products are small, light, highly efficient and reliable solutions for industrial, telecom, and medical applications In addition to the various wattage ratings and output voltages, we can quickly develop semi-custom solutions to meet your specific desi
AC DC Power 1U Front End
The low-profile design and dense packaging of our 1U units make them ideal for delivering reliable, efficient power to servers, workstations, storage devices, and other distributed power systems. Our aim is to provide you with products of the highest efficiency and reliability, to significantly lower the host system cooling requirements, as part of our never-ending effort to further contribute to the power savings in our customers’ applications.
Maxell Coin Batteries For Anti Theft And Keyless Entry System
Maxell coin batteries ave been in the market for many years and with Japanese high quality assurance system reputable in the market, you can be assured of the quality of batteries when used in your device system. Maxell coin battery is a lithium manganese diode battery with small size and lightweight, having an operating voltage of 3V and ability to support wide temperature. It is used in many types of electronic devices as memory and RTC backup.
EP Epoxy Resin DMD Prepreg
EP Epoxy Resin DMD Prepreg(e.g. VOLTAFLEXPREG EP2694) is a flexible three-ply combination material consisting of polyester fleece, polyester film and polyester fleece and is lacquered on both sides with an epoxy resin in B-stage. EP Epoxy Resin DMD Prepreg has high electrical and mechanical strength and shows good adhesive properties against metallic surfaces.
LR-AP710 Aramid Paper is a calendered insulation paper made from a synthetic aromatic polyamide polymer. Aramid Paper offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Its products can extend the life of electrical equipment, reduce premature failures and repairs, and act as a safeguard in unforeseen electrical stress situations.