Electrical and power Services in Thane (395 results)
MEDIUM WAVE INFRARED HEATER
Medium Wave Infrared (Quartz) Heaters consist of a helically wound resistance coil housed in a pure vitreous silica fused quartz tube. The Quartz tubing is terminated with specially designed insulating caps, which are securely fastened to the quartz tube with high temperature cement providing excellent support to the power connecting termination. Quartz Heaters are designed to be used in a horizontal position only. Quartz Heaters are available in various diameters like 8,10,12,15,19 mm & length
We provide our TURNKEY SOLUTIONS FOR : Substitution of furnace oil on boilers, Thermic fluid heaters, by briquettes or coal. Substitution of LPG, LDO, HSD on furnaces by producer gas. Part substitution of HSD on DG set by producer gas. Spark ignition engines on 100% producer gas with combined cycle. Briquettes / Pellets / Supply. Evaporators. O And M
ENERGY MONITORING And IMPLEMENTATION SERVICES
This service is normally provided to industries where we have carried out energy audit. The service includes designing energy monitoring formats, preparing them on a monthly basis, deviation analysis & report to decrease any rise in energy consumption level observed, with corrective recommendation. We provide engineering services to implement our audits recommendation. We are presently retained by four industries for this service. NOTE We process all equipments to provide the above energy con
ENERGY NORMS FIXATION And PRODUCT COSTING
Specific energy consumption (energy required to manufacture a unit of the product) norms are established by Condensate measurement, heat & mass balances, & power measurements. These norms are required by industry for internal energy monitoring, costing of product price or for statutory declaration of energy costs.
STEAM TRAPS STUDY And SERVICING
On-line study of steam traps is carried out by sound & temperature measurements. Report indicating condition of the traps, service required optimal selection of type & size is given. We have tested more than five thousand steam traps & identified this area as a commonly neglected steam loser.
CO GENERATION STUDIES
Techno economics analysis for co-generation of process steam & power is analyzed for the industry Studies of the industry" process steam & power requirements are carried out. Project co-ordination services for co-generation are provided. Performance evaluation of existing co-generation plant is carried out. With escalating electrical energy prices & scarce availability, co-generation of power for industries requiring process steam seems to be only optimal energy strategy. Open / Combined cycle c
IMPLEMENTATION OF WASTE HEAT RECOVERY SCHEMES
Implementation would normally include details process design, listing of suppliers & supervision of commissioning. Waste heat recovery schemes which we have implemented for industries are : Condensate recovery system, flash steam trapping condensers, waste heat boilers for furnaces / kilns, pre-heating of combustion air for direct fired equipments / boilers, heat exchangers for process streams, heat recovery from D. C. sets, thermopacs, etc. We have also assisted in development & testing of w
BOILER EFFICIENCY And TEST DETERMINATION Services
We carry out boiler efficiency tests as per DIN 1942 standards, with our set of equipments. Both direct & indirect test are carried out. In direct test, actual fuel fed & water evaporated are measured whereas in indirect method. O2%, CO2% stack gas temperatures, ash loss, wet gas loss are determined. Based on these values, efficiency improvement areas with techno economic analysis are presented. Efficiency improvement areas implemented include tuning of boilers, sizing of coals, de-rating of gra
ELECTRICAL ENERGY AUDIT Services
Energy billing patterns are analyzed for relevant penalties or fixed rates. Amperage, voltage, power factor & KWH on motors are measured. Actual running hours per batch or per hour out puts are observed. Illumination levels, refrigeration load & compressed air system are evaluated for house keeping measures. Electrical energy balance is prepared with norms for each product. Based on the energy losses & percentage loading of rotating equipment, energy conservation measures are presented with tech
THERMAL ENERGY AUDIT Services
Studies are undertaken to determine efficiencies of generation, distribution & Utilisation of thermal energies. Boiler efficiency tests are carried out to determine steam generation to fuel ratio. Condensates coming from coil, jackets, evaporators are collected to arrive at norms for each operation. Exhausts of furnaces, boilers are quantified by analyzing them with our set of equipments. Fixed heating load, start up load & insulation losses are determines. Based on the above results thermal ene
Escube strongly believes about giving end-to-end solution to customers, keeping this in mind Escube also provides maintenance service for products installed at client place. We also cater as a separate service division to any Air conditioning problems or maintenance. A strong on-field technical team takes care of Escube service, where we offer onsite visit, problem identification, rectification and also annual maintenance contract. Escube strives to provide a total package for all the needs o
Escube Ambience Management Services
Escube is widely known in the Indian and overseas market for its air conditioning expertise. Escube aspires to become a leading end-to-end ambience design company. Escube will design world-class ambience solution as per client requirement where our services cover Air-Conditioning, Ventilation and Refrigeration.