Entertainment and sports Products from Italy (36 results)
GIANT DROP 60 Mt
The MEGA DROP 60 ride is made up of one vertical steel Tower structure fixed to the ground. The round-section vehicle can accommodate 20 passengers and it slides on the tower's external structure. The vehicle is taken up to the top of the tower by being hooked to an auxiliary frame called pick-up. Then vehicle is released - falling freely to the ground - and it is finally braked by means of permanent magnetic brakes.
CONTACT - NEW RIDE
The Contact ride is made up of an inclinated rotating arm fixed to a semi-trailer which supports on one side a counterweight and on its opposite side a 9 mts. round plate which rotates both clockwise and counterclockwise; 5 spinning vehicles are inserted in it and each one provides 4 seats. This new fantastic ride allows 3 different rotations: while the main arm starts to rotate it also starts to constantly change the rotating angle up to a max. of 39?! At the same time also the plate rotates at
SPACE JAM 24 Seats
The SPACE JAM ride consists of four inclined pillars fixed on concrete foundations and converging on top - where a swinging arm is connected by means of two swinging bearings. The other extremity of the swinging arm coincides with a rotating structure - whose external side are internally lined 6 set of seats with a total of 24 seats divided into six sections with four seats each. By means of DC motors the arm is made to swing up to a maximum height of 120? - whereas the plate is made to rotate u
KAMIKAZE 32 Seats
The KAMIKAZE ride is made up of a central column fixed on concrete foundation - semitrailer - supporting two swinging arms. On one side of each arm is fixed a vehicle - while to the other side a counterweight is connected. Each car can accommodate up to 16 passengers - divided in eight rows of two seats. The repeated arm swinging at different heights - ending in complete rotations results in an extraordinary amount of sensations both for passengers and bystanders. The acceleration of the ride re
BOOMERANG 32 Seats
The BOOMERANG ride consists of four inclined pillars fixed on concrete foundations and converging on top - where a swinging arm is connected by means of two swinging bearings. The other extremity of the swinging arm coincides with a rotating circular plate - whose circumference is internally lined with a row of 32 seats divided into eight sections with four seats each. By means of DC motors the arm is made to swing up to a maximum height of 80? - whereas the plate is made to rotate up to a maxim
CATACLYSM 40 Seats
The ?CATACLYSM? ride is made up of one steel central tower fixed on concrete foundations. Two swinging arms are fixed on the top of the telescopic tower by means of two swinging bearings. On the bottom of every arm is fixed a vehicle with a total of 40 seats.
Hurricane 30 Seats
The Hurricane ride consists of two pillars fixed on concrete foundations - or semitrailer - on top of them two rotating arms are connected one thirty-seat vehicle to which they are fixed by means of two swinging bearings. The vehicle is made to perform a 360? rotation around its vertical axis always maintaining an horizontal position - thus creating a spectacular effect for passengers and bystanders.
Happy Fable 8/37
L?attrazione ?HAPPY FABLE? ? formata da un piatto rotante che ruota attorno ad un albero centrale. La rotazione del piatto ? ottenuta grazie ad un motoriduttore situato sulla parte esterna a cui ? fissata una ruota gommata. Questo particolare accorgimento garantisce un movimento scorrevole e silenzioso. Inoltre al centro del piatto ? situato un centro con quattro soggetti che possono alzarsi verticalmente con l?ausilio di un cilindro idraulico posto sul centro della giostra. La giostra pu? ruota
The HAPPY SAILOR consists of a steel centre fixed on a concrete foundation - or trailer - and rotating on a swinging bearing - 16 arms hinged to the centre with a wheel at the end - a circular track with undulation from a min. of 420 mm to a max. of 1.400 mm. and 16 vehicles boat-shaped installed on the arms. The drive system is made with DC motor-gear box and pinion that - operating on the swinging bearing - rotates the whole ride. In addition each vehicle can be rotated 210? by a set of AC mot
Giant Space Loop
The GIANT SPACE LOOP ride is made up of four inclined pillars fixed two by two. The lowest side of the columns is fixed on concrete foundations by means of welded plates - while on their top are installed - still by means of swinging bearings two rotating arms. On the top of every arm is fixed a counterweight - while on the lowest side is fixed - by means of swinging bearings - a vehicle. This vehicle can accommodate 40 passengers divided into two sections of twenty seats each. On its sides two
JUNGLE DROP 30 Met
The JUNGLE DROP ride is made up of one vertical steel Tower structure fixed to a steel basement - or trailer - which is kept stable by means of four stabilising legs. The half round-section vehicle can accommodate 8 passengers and it slides on the tower's external structure. The vehicle is taken up to the top of the tower by being hooked by means of a steel chain. Then vehicle is released - falling freely to the ground - and it is finally braked by means of permanent magnetic brakes.
The ride is provided with a fail-safe system control. All the ride operations, except the management of the passengers loading/unloading platforms, are automatic. The main electrical panel must be located in a control room provided by the Customer, where the inside temperature cannot be lower than 5?C nor exceed 30?C and where humidity must range between 35% and 70%.